Home
Online Store
Español
Français
Wind Turbine Compound
Extreme Wind Turbine Compound
- Other SAF-T-EZE Products
- Anti-Seize Compound
- Aircraft Grade Anti-Seize
- Blue Moly Grade Anti-Seize
- Pure Copper Grade Anti-Seize
- Dry Moly Anti-Seize
- Food/Drug Grade Anti-Seize
- Graphite Grade Anti-Seize
- Heavy Metal Free Anti-Seize
- Marine Grade Anti-Seize
- Moly Grade Anti-Seize
- Moly 50 Anti-Seize
- Nickel Grade Anti-Seize
- Nickel Premium Anti-Seize
- Non-Metallic Anti-Seize
- Nuclear Grade Anti-Seize
- Regular Grade Anti-Seize
- S. Steel Grade Anti-Seize
- Zinc Grade Anti-Seize
- Lubricant
- Maintenance (Aerosol)
- Sealant
- Anti-Seize Compound
SAF-T-EZE® Extreme Wind Turbine Compound is a smooth non-separating formula consisting of lithium soap thickened grease into which is compounded very fine flaked copper, as well as graphite lubricants and corrosion fighting inhibitors. The high performance grease and solid additives provide extreme pressure lubricating properties that prevent galling and cold welding and at the same time prevents water wash out and galvanic pitting from electrolysis of road salt, acid rain, or salt water.
SAF-T-EZE® Extreme Wind Turbine Compound is non-hardening and has exceptional thermal stability. The particles present are inert and will not evaporate at extreme temperatures, and their heat resistant qualities will prevent carbon fusion and seizure at temperatures up to 2000ºF (1095ºC). This anti-seize compound does not contain lead, molybdenum disulfide or halogen compounds.
- Extreme Corrosion resistance
- Prevents seizing in harsh environment
- Will not dry out
- Contains graphite for added lubricity
- Water and chemical resistant
- Aluminum and copper prevent hydrolysis
Performs to 2000ºF (1095ºC)| Product | Part Number | Container Size | Case Qty |
|---|---|---|---|
| WTBT-8 | 81237 | 8 oz Brush Top | 12 |
| WTBT-16 | 81257 | 16 oz Brush Top | 12 |
| WT-42 | 81278 | 42 lb Pail | --- |
General Information
SAF-T-EZE® Extreme Wind Turbine Compound can be used as a lubricant, a sealer, a break in lubricant, or tapping compound on plastics as well as metals. Surfaces are best cleaned before application as grit or low quality oil/grease may be present and best performance is required. The reduction in assembly friction increases torque tension by about 20 percent. Use on threaded parts, bushings, gears, valve stems, chains, sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.
Use SAF-T-EZE® Anti-Seize for Ultimate Protection!
Extreme Wind Turbine Compound
COLOR: SILVER GREY
TEMPERATURE RANGE: -65ºF TO 2000ºF
NLGI: 3
SPECIFIC GRAVITY: 1.28 gm/cc
WEIGHT PER GALLON: 10.68 LB
PENETRATION RANGE: 225 ± 25
DROP POINT: 350ºF
FLASH POINT C.O.C.: 302ºF (CC)
PARTICLE SIZE: 1 MIL. MAXIMUM (25)
''K'' VALUE: 0.16
TIMKEN OK LOAD: 47 LBS (ASTM D2509)
TIMKEN FAIL LOAD: 52 LBS (ASTM D2509)
This product is not recommended for pure oxygen systems.
SAF-T-LOK and SAF-T-EZE are registered trademarks of SAF-T-LOK International Corporation.
All product names, logos, and brands are property of their respective owners. All product names, logos and brands used on this website are for identification purposes only.
© Copyright
All rights reserved.
No part of this site may be copied, reproduced or transmitted in any forms or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAF-T-LOK International Corporation.
